Product Info

Table Of Contents

4. INSTALL DRIVER

4.1.RUNNING THE KIPLING PROGRAM

1. Install the Kipling Software driver.

o The Kipling program contains the drivers and Kipling SW which can be used to test the

hardware connections.

2. Once the TP-Link is setup as an Access Point, Turn on VetGuardian

3. A Green LED Light indicates that the device is on

4. Wait for a few seconds and the Camera, the Yellow light, and the flashing blue light will

appear on the camera

5. On the Desktop, look for the Kipling Software

6. The Kipling software is initially used to connect to the LABJACK. (The LabJack is a device that

is inside the VetGuardian to transmit the raw signals to the laptop via the TP-Link)