User's Manual

5900 Optical Court
San Jose, CA 95138
t: 408 754 2000 f: 408 754 2505
www.stryker.com
Endoscopy
Page 4 of 4
songain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire àl'établissement d'une communication satisfaisante.
INFORMATION FOR OEM SYSTEM INTEGRATION
This radio transmitter 4919C-SYNKTX has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible gain and
required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device.
Le présent émetteur radio 4919C-SYNKTX a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non
inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l'exploitation de l'émetteur.
For product available in the USA/Canada market. Selection of other channels is not
possible.
This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in
indoor environment only.
Antenna information: Embedded inverted F Antenna: 1.9dBi
Frequency Tolerance：+/-20ppm
Manual and Product Labeling information To the End User
The end user manual shall include all required regulatory information/warning as shown
in this manual. The end user manual shall include the RF Exposure Warning statement
to advise end user that a minimum of 20cm needs to be kept between end user and the
antenna. And when this module is installed in the host product, you must include a
"Contains FCC ID: SSH-SYNKTX" and a “Contains IC: 4919C-SYNKTX” in the label of
the host product.