User Manual

11
Direction Arrows: Sets handpiece
mode.
Forward (clockwise)
Reverse (counterclock-
wise)
Oscillate
Irrigation: Activates or
deactivates handpiece
irrigation.
System Options
Options: Gives access to
handpiece adjustments,
system information, console
adjustments and user
preference.
Handpiece option:
Accesses corre-
sponding handpiece
adjustment screens.
Exit: Returns to previous
screen.
Information: Displays system
information screen.
Console: Gives access to
console adjustment screen.
Allows access to the surgeon
Handpiece Select
This type of icon appears when
a cord (without a handpiece) is
plugged into the corresponding
Endo, TPS1 or TPS2 port.
It appears depressed when
selected.
The handpiece graphic appears
when a handpiece is attached
to the corresponding cord.
The handpiece graphic
highlights and the icon appears
depressed when selected.
High: Enables handpiece to
operate in a high speed mode.
Low: Enables handpiece to
operate in a low speed mode.
Toggle Buttons
NOTE: For easy identification, only toggle
buttons have a white background.
Speed: Use with the increase
and decrease icons to adjust
rotary handpiece speed.
Water: Use with the increase
and decrease icons to adjust
irrigation flow.
Power: Use with the increase
and decrease icons to adjust
saw power.
Variable: Handpiece speed
responds to varying degrees of
pressure on the footswitch or
handswitch.
Nonvariable: Handpiece
operates at constant set-point
speed/power level.
One touch: Handpiece is
activated by one touch of a
trigger device and continues to
run when the trigger device is
released. Handpiece is
deactivated by touching any
trigger device. In this mode, the
handpiece operates at constant
set-point speed/power level.
Footswitch Icon: Appears
when a footswitch is connected
to the console. Also gives
access to footswitch adjust-
ments screen.
Quick Reference Guide
Icon Definition
Adjustment Arrows: Use in conjunction
with other options to set handpiece
speed or power, braking, acceleration,
irrigation flow, screen contrast etc.
Increase
Decrease
Advanced: - Accesses the
advanced footswitch mapping
screen.
Button: Access button
mapping screen.
Return to full screen: Return
from Big to full handpiece
screen.
NOTE: TPS Console models REF 5100-1 and 5100-201 do
not display options related to handpiece irrigation.