User Manual

12
Saw Handpiece Screen
TPS Oscillating and Sagittal Saws
POWER/WATER ADJUSTMENT
The power icon functions as a toggle
switch for power and water settings.
Power and irrigation adjustments are
made using the adjustment arrows.
As the power setting is reduced from 100%, a vertical
bar displays to correspond to the lower selected
maximum power.
The irrigation setting is not displayed on this screen.
However, it can be seen on the Handpiece Adjust-
ments screen.
METHOD OF OPERATION
Saws can be operated with the TPS Universal
Handswitch or TPS Footswitch.
Handswitch Handpiece selection can be made by
depressing the handswitch once. The handpiece
select icon changes to indicate the active handpiece.
Depress the handswitch again to run the handpiece.
Handpiece runs from start-up to the maximum
selected speed.
Footswitch Handpiece runs from start-up to the
maximum selected speed with either the forward or
reverse pedal.
This screen appears when a TPS saw is selected at the TPS1 port with the
maximum power set at 100%.
ENDO, TPS2 and the footswitch icons indicate other instruments are plugged
into the console.