User Manual

The Control Screen

No Handpiece Detected

Screen

This image indicates that no handpiece is at-

tached to the cord plugged into the selected port.

The screen will change to the handpiece screen

when the missing handpiece is connected to the

cord.

NOTE: This screen will also appear if the console

is unable to recognize the handpiece. This could

be caused by a handpiece that is not compatible

with the TPS console, or a faulty or damaged

handpiece or cord.

This example shows that no handpiece is attached to the cord plugged into the

TPS2 port.

TPS Start-Up Screen

This display appears on the screen every time the

console is turned on.

This display remains on the screen until a cord is

plugged into one of the TPS handpiece ports or the

OPT button is depressed.

If a handpiece cord is plugged into a handpiece

port when the console is turned on, this display

shows momentarily before changing to either a no

handpiece detected screen or to the screen of the

selected handpiece.