User's Manual

13
DRAFT
Adjust Options
If no handpieces or cords are connected to the console during initial power up, the following screen will appear:
If the Adjust Options button is
pressed before any cords or
handpieces are connected,
the following screen will
appear. At this time, console
options that are not handpiece
specific may be set up before
the sterile handpieces are
brought into the operating
room and plugged into the
console.
The subdued portions of these screens
will become available once a
handpiece is plugged into the console.
These screens do not depend on
whether a footswitch is plugged into the
console.
Plug in Handpiece Cable Screen
To Power Up:
Power Up Screen
This screen is momentarily displayed while the console powers up. Note the software version is displayed in the lower right corner of
the screen.