User's Manual

DRAFT

To Adjust Options:

From the HOME screen, touch the Adjust Options button to adjust the handpiece and footswitch options. The available

handpiece options will depend on the type of handpiece that is identified at the top of the screen.

Adjust Acceleration

• Touch the plus and minus buttons or slider bar to adjust the

percent of acceleration [0 to 100%].

• At 100%, the handpiece speed accelerates quickly.

Acceleration slows as the setting approaches zero percent.

Adjust Braking

• Touch the plus

and minus buttons

or slider bar to

adjust the percent

of braking [0 to

100%].

• At 100%, the

handpiece stops

abruptly. The

amount of

deceleration

decreases as the

setting

approaches zero

percent.

Adjust Oscillate Turns

• Touch the plus and minus buttons to select the number of turns per direction when

running a handpiece in the oscillate mode.

Select Run Mode

• FIXED: handpiece speed runs at the maximum setting

only. Varying pressure on the footswitch or handswitch

will not vary the handpiece speed.

• VARIABLE: handpiece speed responds to the degree

of pressure applied to the footswitch or handswitch.

• ONE TOUCH: Handpiece activation responds to one

touch of a trigger device

(footswitch, handswitch) and

continues to run when the

trigger device is released.

Handpiece is deactivated by

touching any trigger device.

In this mode, the handpiece

operates at constant set-

point speed/power level.