User's Manual

18
DRAFT
Assign Handpiece Port to a Footswitch Port
The Assign Handpiece to Footswitch screen will appear automatically when connecting two footswitches and two or
more handpieces to the console.
To Program Footswitch Options:
The color options above indicate the default setting for two connected footswitches and three connected handpieces.
Touch the handpiece name button to toggle through the four color options. Each color indicates a footswitch to
handpiece port assignment as described below:
Access the Assign Handpiece to Footswitch screen manually as follows:
1. From HOME screen, press Adjust Options button
2. From Adjust Options screen, press Program Footswitch button
3. From Program Footswitch screen, press Assign Handpiece to Footswitch button
Yellow indicates the bottom (yellow) footswitch port is assigned to the handpiece port.
Green indicates the top (green) footswitch port is assigned to the handpiece port.
Green/Yellow combination indicates both footswitch ports are assigned to the handpiece port.
Gray indicates no footswitch port is assigned to the handpiece port.
WARNING: DO NOT perform footswitch mapping (assign a handpiece port to a footswitch port) while
operating a handpiece. Failure to comply may result in patient and/or operating room staff injury.
Color icon indicates which handpiece will be operated when the associated footswitch is
actuated.