User's Manual

29
DRAFT
Error Messages*
* For more information, contact your Stryker sales representative or Customer Service at 1-800-253-3210.
Message
Error xxx. Console hardware fault is
detected.
Error xxx. Footswitch fault is detected;
the right pedal is disabled.
Error xxx. Footswitch fault detected, left
pedal is disabled.
Error xxx. Footswitch is not detected or
fails to be recognized by the console.
Error xxx. Handpiece fault is detected,
handpiece trigger is disabled.
Error xxx. Handpiece is not detected or
fails to be recognized by the console.
Error xxx. Handpiece requires
additional console hardware.
Error xxx. Cutting accessory requires
additional console hardware.
Action to Take
Contact your Stryker service representative. Turn the console off and on
again. If the problem persists, return the console to Stryker for repair.
Contact your Stryker service representative. Unplug the footswitch from the
console and plug it into the console again. If the problem persists, return the
footswitch to Stryker for repair.
Contact your Stryker service representative. Unplug the footswitch from the
console and plug it into the console again. If the problem persists, return the
footswitch to Stryker for repair.
Contact your Stryker service representative. Unplug the footswitch from the
console and plug it into the console again. If the problem persists, return the
footswitch to Stryker for repair.
Contact your Stryker service representative. Unplug the cord from
handpiece and plug the cord into the handpiece again. If the problem
persists, return the handpiece to Stryker for repair.
Contact your Stryker service representative. Unplug handpiece from
console and plug in again. If problem persists, return handpiece Stryker for
repair.
Contact your Stryker service representative.
See the instructions for use supplied with the cutting accessory.
To Be Determined