User's Manual

www.stryker.com 6390-009-001 REV B 71
Return To Table of Contents
Guidance and Manufacturer’s Declaration - Emissions
Model 6390 Power-LOAD System is intended for use in the electromagnetic environment specified below. The
customer or user of the Model 6390 Power-LOAD System should ensure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment
RF Emissions
CISPR 11
Group 1
Model 6390 Power-LOAD uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
CISPR 11
Group 2
Model 6390 Power-LOAD must emit Electromagnetic
energy in order to perform its intended function. Nearby
electronic equipment may be affected.
RF Emissions
CISPR 11
Class A
Harmonics
IEC 61000-3-2
Class A
Flicker
IEC 61000-3-3
Complies
Model 6390 Power-LOAD is suitable for use in all
establishments, other than domestic, and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
POWER-LOAD
EMC Information