Users Manual

10
Setup
• When the SYNK® 4K Wireless System is interconnected with
other electrical devices, leakage currents may be additive,
resulting in electromagnetic emissions that can interfere
with the normal function of electronic medical equipment.
To properly control electromagnetic emissions and avoid
potential harm to the patient or user, ensure all electrical
devices are installed and interconnected according to the
requirements of IEC 60601-1.
• RF and other mobile communications equipment may
a ect the normal function of the SYNK® 4K Wireless System.
When placing the SYNK® 4K Wireless System, follow the
instructions located in the “Electromagnetic Compatibility”
section of this manual.
Device Compatibility
For optimal use, the SYNK® 4K Wireless System is designed to work with
the 1688 Camera Control Unit (1688010000), the Connected OR Hub
(0240200100) with software version 1.2.3 or higher, and the 32” 4K Surgical
Display (0240031050). All features and instructions described in this user
manual apply to this system unless otherwise noted.
The following table lists alternate video sources that are compatible with
the SYNK® 4K Wireless System. Please contact a Stryker representative for
assistance.
Alternate Video Sources
1588010000 1588 AIM Camera Control Unit (CCU)
• Connect to the system using an HDMI to DVI Cable
(P32235)
0240099250 S-Video/Composite to HDMI Converter
0240099255 VGA/RGB to HDMI Converter
0240099260 3G-SDI to HDMI Converter
0240099265 DVI to HDMI Converter
DRAFT