Users Manual

3
4. To ensure electromagnetic compatibility, refer to the “Electromagnetic
Compatibility” section of this manual. The devices must be installed and
operated according to the EMC information provided in this manual.
5. Do not position the devices so that it is di cult to disconnect the power
cords from the supply mains.
6. Connect the devices to a hospital grade receptacle to achieve grounding
reliability.
7. To connect to an international power supply, use an attachment plug
appropriate for the power outlet.
8. Remove the power cord when transporting the devices.
9. Never operate the devices immediately after transportation from a cold
location to a warm location.
10. Power o the devices when they are not in use.
11. Unplug the receiver and transmitter if they are not to be used for an
extended period of time.
12. Pay close attention to the care and cleaning instructions in this manual. A
deviation may cause damage.
13. Changes or modi cations not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
devices.
Note: This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving unit.
• Increase the separation distance between the units.
• Connect the unit to an outlet on a circuit di erent from that to which
the other unit(s) are connected.
• Consult the manufacturer or  eld service technician for help.
The warranty is void if any of these warnings or cautions are disregarded.
These products contain electrical waste or electronic equipment. They must
not be disposed of as unsorted municipal waste and must be collected
separately.
DRAFT