USER MANUAL tremolo & reverb ®
Flint - tremolo & reverb User Manual ® Front Panel INTENSITY: Controls DECAY: Varies the reverb time from MIX: Controls the reverb wet the intensity or Depth of short to long. The ‘70s and ‘80s verbs will mix from full dry at minimum the tremolo effect. This is approach ‘infinite’ decay at maximum. to full wet with no dry signal at accomplished by varying maximum. A 50/50 mix occurs the amplitude of the LFO around 3 o’clock on the mix that controls the tremolo. At knob.
Flint - tremolo & reverb User Manual ® Secondary Functions EFFECT ORDER: Sets whether the signal travels through Reverb then Tremolo or Tremolo then Reverb. The default is Reverb through Tremolo as this is how many vintage amplifier circuits worked. TREMOLO BOOST / CUT: Controls the +/- 3dB boost or cut when Tremolo is engaged. Set to 12 o’clock for unity gain. TAP DIVISION: Sets the desired tap division for the Tremolo LFO when an external TAP footswitch is used.
Flint - tremolo & reverb User Manual ® Rear Panel INPUT High impedance mono or TRS stereo input (internally jumper configurable.) Standard 9V DC center negative power input. 250 mA available current required. EXP LEFT OUT RIGHT OUT 9VDC + - Connect an external FAVORITE SWITCH to store and recall your favorite preset. TIP: Press and hold the Reverb BYPASS switch to store your favorite setting. Stereo outputs. Use LEFT OUT for mono signal output.
Flint - tremolo & reverb User Manual ® Power up settings TREMOLO ‘61 harm ‘63 tube ‘65 photo NTENSITY REVERB TREMOLO ‘60s ‘61 harm ‘70s ‘63 tube ‘65 photo ‘80s Power up with both toggle switches MIX in the UP position while holding INTENSITY footswitches to configure the Flint EXP jack for use with an expression pedal.
Flint - tremolo & reverb User Manual ® TRS Input Jumper Remove the back cover to select either mono input or TRS stereo input. MONO INPUT Place the jumper on the right 2 pins. (this is how Flint ships from the factory) STEREO INPUT Place the jumper on the left 2 pins. TRS (tip/ring/sleeve) STEREO INPUT ADAPTER If configured for stereo input, a TRS stereo input adapter can be used to access the stereo inputs.
Flint - tremolo & reverb User Manual ® Sample Settings TREMOLO REVERB ‘61 harm TREMOLO ‘63 tube ‘65 photo ‘80s MIX MIX DECAY SPEED COLOR SPEED COLOR Tweed Surf Rumble TREMOLO REVERB ‘61 harm ‘63 tube ‘65 photo ‘80s MIX ‘70s ‘80s INTENSITY MIX DECAY DECAY SPEED SPEED COLOR Tube Biased TREMOLO ‘61 harm ‘60s ‘63 tube ‘65 photo COLOR Electro SolidPlate REVERB ‘61 harm ‘80s INTENSITY MIX REVERB ‘60s ‘63 tube ‘65 photo ‘70s ‘70s ‘80s INTENSITY MIX DECAY DECAY SPEED S
Flint - tremolo & reverb User Manual ® Features • Hand crafted tremolo & reverb algorithms inspired by classic systems • Ultra Low Noise, high performance A/D and D/A Converters • Premium analog front end and output section • High Performance DSP • ‘61 Harmonic, ‘63 Tube Bias, and ‘65 Photoresistor Tremolo types • ‘60s Spring, ‘70s Electronic Plate, and ‘80s Rack Reverb types • Stereo Input (via TRS jack) and Stereo output • Expression pedal input with selectable control over any knob parameter • Compatib
Flint - tremolo & reverb User Manual ® Strymon Non-Transferrable Limited Warranty Warranty Strymon warrants the product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase. If the product fails within the warranty period, Strymon will repair or, at our discretion, replace the product at no cost to the original purchaser. Exclusions This warranty covers defects in manufacturing discovered while using this product as recommended by Strymon.
