User Manual

IRIDIUM - Amp & IR Cab
pg 21
STEREO
MONO
IN OUT L OUT R EXP
SUM
USB
CABAMP
ROOM
TREBLE
BASS
FAV ON
DRIVE LEVEL
a
b
c
amp & ir cab
MIDDLE
round
chime
punch
EXP
Press and hold the A footswitch on MultiSwitch Plus while
connecting the TRS cable to MultiSwitch Plus to select
Preset mode on MultiSwitch Plus.
External Control - MultiSwitch Plus
Press the ON or FAV footswitch to exit and store the MIDI channel
and the MIDI Output setting.
Disconnect power from Iridium and reconnect while holding down
both footswitches. Hold until both LEDs stop blinking.
Disconnect USB from Iridium, if connected.
Turn the DRIVE knob all the way counter-clockwise to set the MIDI
channel to Channel 1. The FAV LED should be GREEN.
Turn the LEVEL knob all the way counter-clockwise to set the MIDI
Out mode to On. The ON LED should be GREEN.
5
2
1
3
4
Configure Iridium and MultiSwitch Plus for remote access to three
additional presets in addition to the onboard Favorite setting.
Configure the EXP jack for Digital mode.
(See page 14 for details.)
Connect a TRS cable to the
EXP jack on Iridium.
6
7
8