User Manual

IRIDIUM - Amp & IR Cab

pg 22

External Control - MultiSwitch Plus (cont.)

Selecting Iridium presets with MultiSwitch Plus:

Step on a switch that is not illuminated (or the onboard FAV) to

recall the relevant preset.

Step on an illuminated switch to revert to the current set of knob

positions.

Saving Iridium presets with MultiSwitch Plus:

Dial in the sound that you would like to save as your preset on

Iridium.

Press and hold the FAV footswitch until the FAV LED blinks BLUE.

Press the A, B, or C footswitch on MultiSwitch Plus to save the

desired preset location. Press the onboard FAV footswitch on

Iridium to save to the desired location.

Preset 1 Preset 2 Preset 3

NOTE: Footswitches 1, 2, and 3 on MultiSwitch Plus correspond to

MIDI program changes 1, 2, and 3.

NOTE: The onboard FAV footswitch preset on Iridium corresponds

to MIDI program change 0.