User Manual

IRIDIUM - Amp & IR Cab

pg 25

Press the ON footswitch again to store the MIDI channel and begin.

Press and hold both

footswitches while connecting

power to the pedal. Once

both LEDs flash, release the

footswitches.

STEREO

MONO

IN OUT L OUT R EXP

SUM

USB

CABAMP

ROOM

TREBLE

BASS

FAV ON

DRIVE LEVEL

amp & ir cab

MIDDLE

round

chime

punch

FAV

DRIVE

Step 2 – Set MIDI Channel

This determines which MIDI channel Iridium will use to send and

receive MIDI data. See the illustrated guide below for complete

instructions. To select channel 4-16, you will need to connect Iridium to

a MIDI device.

Turn the DRIVE knob to set the MIDI

communication channel. FAV LED

indicates status.

Channel 1 - GREEN (default)

Channel 2 - AMBER Channel 2

Channel 3 - RED

Channel 4-16 - BLUE (Requires ¼” MIDI connection.) Once the LED

turns BLUE, it will blink until the pedal receives a MIDI Program

Change message. Once a message is received, the pedal will be

set to the MIDI channel that carried the message and the LED will

stop blinking.

Configuring Iridium to Use MIDI (cont.)

Disconnect USB from Iridium, if connected.