User Manual

IRIDIUM - Amp & IR Cab
pg 31
Factory Reset
Factory Reset restores Iridium to its factory default state by erasing
all custom IR cabs, stored presets, Power Up modes, expression pedal
assignments, and Live Edit parameters.
NOTE: Performing a Factory Reset will erase all custom IRs
you have loaded into Iridium and replace them with the factory
default IRs.
STEREO
MONO
IN OUT L OUT R EXP
SUM
USB
CABAMP
ROOM
TREBLE
BASS
FAV ON
DRIVE LEVEL
a
b
c
amp & ir cab
MIDDLE
round
chime
punch
ON
MIDDLE
Press and hold the
ON footswitch while
connecting power to
the pedal. Once both
LEDs flash, release
the footswitch.
Sweep the MIDDLE knob from 0% to 100% and back twice to
RESET. The status is shown on both LEDs:
Turn 1 - AMBER
Turn 2 - RED
Turn 3 - AMBER
Turn 4 - Both LEDs blink RED, pedal resets, and power cycles
1
2