User Manual

IRIDIUM - Amp & IR Cab
pg 37
OUTPUT MODE
(See page 15 for an
illustrated description.)
FACTORY RESET
(See page 31 for an
illustrated description.)
INPUT LEVEL
(See page 16 for an
illustrated description.)
EXP JACK MODE
(See page 17 for an
illustrated description.)
Turn DRIVE knob - status shown on FAV LED
Amp Bypass = GREEN
Cab Bypass = AMBER
Normal = RED
Turn MIDDLE knob - status shown on BOTH
LEDs. Turn the MIDDLE knob from 0-100%
and back two (2) times.
Turn DRIVE knob - status shown on FAV LED
Instrument = GREEN
Line = RED
Turn LEVEL knob - status shown on ON LED
Expression - GREEN
Volume PRE - AMBER
Volume POST - RED
Digital - BLUE
External Favorite - PURPLE
Power Up functions persist through power cycles. Return all
function defaults with factory reset.
Power Up Modes Quick Reference
Press and Hold the ON footswitch while connecting power to Iridium
until both LEDs start blinking to enter Power Up mode. Release the
footswitch and use knobs as described below.
Press ON or FAV to store your changes and exit.
Press and Hold the FAV footswitch while connecting power to Iridium
until both LEDs start blinking to enter Power Up mode. Release the
footswitch and use knobs as described below.
Press FAV again to store your changes and exit.