User Manual

IRIDIUM - Amp & IR Cab
pg 7
Controls and Connections - Front Panel
CAB
The CAB switch selects one of three speaker
cabinet options for each amp type. Each cab is
made up of left and right 24 bit/96 kHz 500ms
impulse responses. Mono cabs have the same IR
loaded into both sides.
Iridium is pre-loaded with a curated set of 9 speaker cabinet IRs from
top IR vendors Cabir.eu, Celestion
®
, OwnHammer, and Valhallir.at.
The factory installed IRs are based on* the following:
A more complete description of these IRs and the original speaker
cabinets can be found on Appendix 2. Additionally, the factory installed
IRs can be replaced with any 24 bit/96 kHz WAV format IRs using our
free Strymon Impulse Manager software available at strymon.net/
support/iridium.
round
a: 1x12 Fender
®
Deluxe Reverb
®
b: 1x12 Fender
®
Blues Junior
®
c: 2x10 Fender
®
Vibrolux
®
chime
a: 2x12 Vox
®
AC30-6 open back fawn
b: 1x12 Custom cab w/ Celestion
®
Blue AlNiCo
c: 4x12 Mesa/Boogie
®
Half-Back
®
punch
a: 4x12 Marshall
®
w/ Celestion
®
G12M-25s
b: 2x12 Custom cab w/ Celestion
®
Vintage 30s
c: 8x12 Marshall
®
w/ Celestion
®
T652s
AMP
round
chime
punch
STEREO
MONO
IN OUT L OUT R EXP
SUM
USB
CABAMP
ROOM
TREBLE
BASS
FAV ON
DRIVE LEVEL
a
b
c
amp & ir cab
MIDDLE
round
chime
punch
CAB
a
b
c
AMP
round
chime
punch
*All product names are trademarks of their respective owners, which are in no way associated or
affiliated with Strymon. These product names, descriptions and images are provided for the sole
purpose of identifying the specific products that were studied during Strymon’s sound design process.
See page 34 for a list of U.S. registered trademarks.