User Manual

ManualsBrandsStrymon ManualsChorus - FlangerMobius Midnight Edition - MULTIDIMENSIONAL MODULATION EFFECTS PROCESSOR

Mobius - User Manual

pg 13

TYPE

push (bank/BPM)

hold (save)

push (param)

hold (global)

VALUE

PARAM 1 PARAM 2

B TAPA

SPEED

DEPTH LEVEL

BANK DOWN BANK UP

FILTER

DESTROYER

VIBE

ROTARY

FLANGER

PHASER

CHORUS

FORMANT

AUTOSWELL

VINTAGE TREM

PATTERN TREM

QUADRATURE

Mod Machines: Filter

An LFO synced filter with three filter types, eight LFO waveshapes and variable resonance. Envelope filtering and traditional

Wah effects (with an Expression pedal) are available.

Frequency Mid: Adjusts the frequency midpoint of the filter sweep.

L | H

PARAMETERS:

Waveshape: Sets waveform shape that the LFO will utilize. Both + and - envelope modes

trigger the filter based on the input level but in opposite directions.

TIPS & TRICKS: With the MODE set to WAH and the DEPTH knob at minimum, attach an expression pedal to control the

F MID param and you’ve got a great sounding wah effect with adjustable Q (resonance).

When using the Env+ or Env- waveshapes, adjust the DEPTH knob to set the response of the filter to your playing

dynamics. Try higher DEPTH for weaker input signals, or back it off with hotter inputs. The SPEED knob controls how

quickly the filter follows the envelope. Set high for funky single line riffs, or lower for smoother response for rhythm

work.

Add some dry signal to make more subtle filtering effects.

Triangle

Square

Ramp

Saw

Random

Envelope +

Envelope -

Sine

Low Pass

Wah

High Pass

Mode: Selects the current filter type. The low pass filter will cut high frequencies, the high

passfilter will cut low frequencies, and wah is a classic wah wah bandpass type filter.

Resonance: Sets the amount of feedback in the filter. High resonance causes ringing at the

cutoff frequency and subsequently a boost around the cutoff.

OFF

|||||||||

Dry Level: Sets the amount of unfiltered signal at the output.

OFF

|||||||||

Spread: Determines the phase offset between the Left and Right LFO signals. Listen to the

effect it has on the stereo image as you adjust the parameter. note: Only applies

when using the unit in a stereo configuration.

Off

1/4

1/2

3/4

FULL