User Manual

Mobius - User Manual
®
pg 3
REAR PANEL:
STEREO
IN/OUT
PRE /
POST
OUTPUT 2INPUT 2
POWER: NEVER
plug into voltage
higher than 9VDC.
Requires at least
300mA of available
current.
MIDI: Full featured MIDI input
and output supporting MIDI CCs,
Program changes, etc. Consult
Page 2
4 for full MIDI spec.
INPUTS:
High
impedance
inputs. Use
LEFT input
for mono.
RIGHT IN is
used as input
2 if using
a pre/post
configuration.
OUTPUTS: Use LEFT
output for mono. RIGHT
OUT is used as output
2 if using a pre/post
configuration.
SIGNAL ROUTING SWITCH: Choose
between standard stereo in/out
operation or pre/post mode. Turn to
Page 22 for more details.
MOD MACHINE PARAMETERS:
Each Mod Machine has numerous parameters in the parameter menu to tweak and customize
your sound. Please consult the Pages 7-19 for a full explanation of all deep edit parameters.
IMPORTANT GLOBAL SETTINGS:
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
To access the global menu push and hold the value encoder. Turn the encoder to select the global to
edit. Push the value encoder again to edit the selected global. Hold again to exit the global menu.
BPM/HZ: Sets display to show tempo in BPM or Hz.
BYPASS: Select TRUEBYP to bypass with true bypass relays. Select BUFBYP to bypass with a high quality analog buffer.
GLOBAL TAP: Allows the last tapped tempo to affect all presets regardless of the tempo saved in the preset.
NAMES (PRESET NAMES): Set to OFF to only display bank number, set to ON to show the first six characters of the preset
name, set to SCROLL to scroll the preset name across the display when it is first selected.
EXP MD (EXP MODE): Configures EXP input to use an expression pedal, Strymon MultiSwitch, or an external tap footswitch.
The full list of global settings are detailed on Pages 20-21.
EXP: Connect
an expression
pedal or switch
for external tap
tempo.
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
EDITING PARAMETERS:
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
While displaying
BANK, NAME, or
BPM
push the
value encoder
to enter PARAMS
menu
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
turn the
value encoder
to select the desired
PARAMETER
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
push the value
encoder again
and turn to edit the
selected PARAMETER
COMMON PARAMETERS - These are available on Mod machines and saved per preset
TAPDIV (TAP DIVISIONS): When tapping tempo, BPM can be set for Whole, Half, Quarter, Dotted Eight, Eighth, Triplets, or
Sixteenth notes
PR/PST (PRE/POST): If using a pre/post setup, this selects whether the effect in the preset is pre or post.
NAME: Allows editing the 16 character name of the current preset. Use the VALUE encoder to change the selected character.
Use the TYPE encoder to select a character. Exit by pressing the VALUE encoder, then press and hold the TYPE encoder to
save the name permanently. Note: For the preset name to be displayed the NAMES global must be set to ON or SCROLL.
EP (EXPRESSION PEDAL ON/OFF): Configure the Expression pedal input to be ON or OFF.
EP SET (EXPRESSION PEDAL SET UP): Set up which knobs are controlled by the expression pedal. Turn the knobs while HEEL
is displayed to select the minimum setting for each knob to be controlled. Turn the knobs while TOE is displayed to select the
maximum setting for each knob to be controlled.
MIDI CL (MIDI CLOCK ON/OFF): Configure whether Mobius listens for incoming MIDI Clock messages.
UNIQUE PARAMETERS - All Mod machines feature unique parameters. For a full listing
of each parameter available on every Mod machine type please consult the User Manual.