User Manual

Mobius - User Manual
®
pg 7
Mod Machines: Common Parameters
All Mod Machines share a set of parameters. These parameters are saved with each preset and include:
Tap Division: Selects the subdivision to use for LFO speed when tapping in a tempo.
Tap division options include:
Whole, Half, Quarter(default), Dotted Eight, Eighth, Triplets, Sixteenth notes
note: If TAPDIV is set to anything other than Quarter notes, the TAP LED will pulse in amber
Pre / Post: Allows configuration per preset of the pre/post configuration available via the rear panel
toggle switch. When Mobius is used in pre/post configuration, set to “PRE” to place the
modulation effect in front of your amp and set to “POST” to place the modulation effect in
your amp’s effect loop.
Name: Allows editing the 16 character name of the current patch. Use the VALUE encoder to
change the selected character. Use the TYPE encoder to select a character. Exit by pressing
the VALUE encoder, then press and hold the TYPE encoder to SAVE the name permanently.
note: For the patch name to be displayed the NAMES global must be set to ON or SCROLL.
Expression Pedal ON/OFF: Enables or disables the expression pedal input for each patch.
Expression Pedal Set: Enters the expression pedal setup for each patch. All knobs can be configured to be
used with the expression pedal. To set up which knobs are controlled by the expression
pedal, push the Value encoder when it displays “EP SET” and it will then display “HEEL”.
Turn the knob(s) to the position desired at heel down on the expression pedal. Then, turn
the Value encoder right to display”TOE” and set the knobs to their desired values at the toe
down position on the expression pedal. An expression pedal can control all of the knobs
simultaneously.
Editing Parameters
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
While displaying
BANK or BPM
push the
value encoder
to enter PARAMS
menu
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
turn the
value encoder
to select the desired
PARAMETER
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
push the value
encoder again
and turn to edit
the selected
PARAMETER
MIDI Clock ON/OFF: When set to ON, Mobius will respond to external MIDI clock from the MIDI input.
This parameter is saved independently so that only presets with this parameter set to
ON will respond to MIDI clock.