User Manual

OJAI - High Current DC Power Supply User Manual
®
pg 3
Connect the other end of the
power adapter cable to Ojai’s
24V IN jack.
Connect up to five 9V
pedals here with the
included pedal cables.
Connect one end of the included IEC
cable to the 24V power adapter, and the
other end to an AC power outlet.
Connect one end of the
included power adapter cable
to the 24V power adapter.
1
3
4
2
PEDAL OUTPUTS: Connect up to
five 9V DC pedals with the included
5.5mm x 2.1mm pedal cables. Each
output is dual-isolated for noise-
free operation, provides 500mA of
available current at 9V DC, and has
center negative polarity.
Ojai will power most effects pedals
on the market, including all Strymon
pedals. However, there are some
pedals that have unique power
requirements. Check with each pedal
manufacturer for recommended
voltage, polarity, and required
current.
For pedals that have unique power
requirements (more than 500mA of
current, other voltages such as 18V),
you can find configuration details
here: strymon.net/support/ojai
LED INDICATOR: Each output
features an LED indicator. LED
illuminates green when a pedal
cable is plugged in. LED will turn off
if cable is unplugged, or the current
draw on the output exceeds the
maximum amount available.
Getting Started
Connect Your Pedals