User Manual

Sunset - Dual Overdrive

pg 11

Factory Reset

Press and hold the

B footswitch during

power up. Both LEDs

will blink.

Release the footswitch and turn the A channel LEVEL knob

from 0-100% and back two (2) times. The A channel LED will

change to AMBER at the extremes of the knob range and

blink RED to indicate that the reset is taking place.

Once the A channel LED stops blinking RED, the reset is

complete and Sunset is ready for use.

FACTORY SETTINGS

• EXP Input Jack: Assigned to work in VOLUME PEDAL mode.

• Expression Pedal Mode Assignment: Assigned to control both DRIVE knobs simultaneously.

• Noise Gate: OFF

• Bypass Mode: True Bypass

Restore the pedal to factory power up modes and secondary functions.