User Manual

TimeLine - User Manual
®
pg 10
Delay Machines: Pattern
A delay with selectable repeat patterns that provide a wide range of sounds. Rhythmic, Ambient delays are easily achievable.
PARAMETERS:
Smear: Softens the attack of the repeats while maintaining full frequency response. This
allows for higher mix levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal gets dreamy and ethereal.
OFF
|||||||||
High Pass: Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Pattern: From simple ping-pong to rhythmic trances, the patterns can inspire new musical
ideas. The patterns will create a stereo fi eld of delay taps when using both the L and R
outputs, but will sum to the mono output when the R output jack is unplugged.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz
140Hz
160Hz
180Hz
200Hz
230Hz
260Hz
300Hz
350Hz
400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
TIPS & TRICKS: The more intricate patterns can be most effective when the input is simple or ‘sparse’.
Pattern 16 is a sort of ‘early refl ection’ pattern. Experiment with delay times around 200mS, lots of Repeats and the
SMEAR param at maximum to create reverb-like sounds. Add some MOD DEPTH at lower MOD SPEED and play with
the Filter and Grit knobs and HIPASS param to dial in the ‘reverb’ tone.