User Manual

TimeLine - User Manual
®
pg 15
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
BANK / TIME
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
Delay Machines: Trem
High Pass: Reduces the low frequency content of the wet signal after the delay. A useful
additional tone sculptor for delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz
140Hz
160Hz
180Hz
200Hz
230Hz
260Hz
300Hz
350Hz
400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
Speed: Controls the speed of the trem waveform in relationship to the Delay Time. When the
delay time is changed by adjusting the Delay TIME knob or with the TAP footswitch, the
lfo will track the change in delay time to stay in sync.
1/32
1/24
1/18
1/16
1/12
1/10
1/9
1/8
1/7
1/6
1/5
1/4
1/3
1/2
2/3
3/4
1/1
4/3
3/2
5/2
3/1
7/2 8/1
4/1
5/1
6/1
7/1
A delay with synchronized tremolo affecting the repeats. Selectable LFOs are provided for the tremolo waveshape.
PARAMETERS:
LFO (Low Frequency Oscillator): Selects from a variety of LFO waveforms to control the trem
envelope of the delayed signal. For a choppy trem delay, choose the SQUARE lfo, or for
smoother sounds try the SINE waveform. A fast lfo speed with a SAW wave can create a
mandolin-like plectrum effect.
TRIANGLE
SQUARE
SINE
RAMP
SAW
Depth: Selects the depth of the LFO waveform, with maximum setting resulting in no delay
volume when the lfo waveform is at it’s lowest point.
OFF
|||||||||
9/1
10/1
12/1
16/1
18/1
24/1
32/1
TIPS & TRICKS: The SAW mode at higher LFO SPEED (3:1, 4:1, etc) will create a high-impact ‘plectrum’ effect.
RAMP mode at lower lfo SPEED can create an interesting reverse envelope. Try SQUARE and SINE at higher
LFO SPEED for a traditionally-inspired new sound. Experiment with the MIX control in conjunction with the
DEPTH parameter to dial in the intensity.