User Manual

TimeLine - User Manual
®
pg 21
Globals Menu
Global parameters affect TimeLine regardless of what preset is currently active.
MS
Time Display: Configures the display to show delay time in Milliseconds or Beats Per Minute.
BPM
PRE
Looper Location: Switches the Looper to be Pre or Post delay.
POST
|||||||
Looper Level: Sets the volume level of the looper playback.
TRUE BYPASS
Bypass Set-Up: Changes the bypass mode between True Bypass and Buffered Bypass. In True
Bypass, electromechanical relays are used to bypass TimeLine so that no
components are touching the input signal. In Buffered Bypass the bypassed
signal runs through a high quality analog buffer.
BUFFERED BYPASS
CH 1 - 16
MIDI Channel: Sets the MIDI Channel. Can be set to 1 - 16.
ON
MIDI Continuous Controllers: Turns MIDI CC messaging (continuous controllers) ON or OFF.
OFF
ON
MIDI Patch Change: Turns MIDI patch change messaging ON or OFF.
OFF
THRU
MIDI Through: When set to THRU, MIDI messages that arrive at the MIDI input are sent to the MIDI
output without ANY additional MIDI messages generated by TimeLine. When set
to MERGE, MIDI messages that arrive at the input and those that are generated by
TimeLine are merged together to be sent to the MIDI output. When set to OFF, only
MIDI messages generated by the controls on Timeline are sent to the MIDI output.
OFF
PLAY
Looper Exit: Determines if the looper stops when exiting or keeps playing in the background.
STOP
MERGE