User Manual

TimeLine - User Manual
®
pg 25
MIDI Specification
CC# Value Range
KNOBS:
Type encoder 19 0-11
Time 3 0-127
Repeats 9 0-127
Mix 14 0-127
Filter 15 0-127
Grit 16 0-127
Speed 17 0-127
Depth 18 0-127
PARAMETERS:
Tap Division 21 0-4
Boost 23 0-60
Persist Off/On 22 0-1
Smear 38 0-18
High Pass 47 0-20
Expression Off/On 60 0-1
MIDI Clock Off/On 63 0-1
dTAPE - Tape Speed 58 0-1
dTAPE - Low End 59 0-20
dBUCKET - Range 45 0-1
DIGITAL - Repeat Dynamics 56 0-1
DUAL - Time 2 32 0-26
DUAL - Repeats 2 34 0-18
DUAL - Mix 2 33 0-18
DUAL - Config 36 0-1
PATTERN - Pattern 39 0-15
SWELL - Rise Time 44 0-27
TREM - Speed 61 0-34
TREM - Depth 57 0-18
TREM - LFO 29 0-4
FILTER - Q 40 0-11
FILTER - LFO 28 0-10
FILTER - Depth 41 0-18
FILTER - Speed 42 0-34
FILTER - Location 43 0-1
LO-Fi - Mix 51 0-20
LO-Fi - Vinyl 52 0-18
LO-Fi - Sample Rate 49 0-20
LO-Fi - Bit Depth 50 0-20
LO-Fi - Filter 53 0-8
ICE - Interval 30 0-29
ICE - Slice 46 0-2
ICE - Blend 25 0-20
DUCK - Sensitivity 37 0-17
DUCK - Release 55 0-20
DUCK - Feedback 54 0-1
LOOPER:
Record 87 any
Play 86 any
Stop 85 any
Reverse (toggle) 94 any
Full/Half Speeed (toggle) 95 any
Pre/Post (toggle) 96 any
Undo (to initial loop) 89 any
Redo 90 any
Looper Level 98 0-127
MIDI Patch changes:
Timeline presets are arranged in a grid of 100 numbered
Banks (00-99) with 2 presets (A and B) within each Bank for
a total of 200 presets.
Because MIDI Program Change messages have a maximum
number of 128 (0-127), the presets are grouped into 2 MIDI
Patch Banks:
MIDI BANK 0 = PRESETS 00A-63B
MIDI BANK 1 = PRESETS 64A-99B
The presets are numbered sequentially within each bank:
PRESET 00A = MIDI program # 0
PRESET 00B = MIDI program # 1
PRESET 01A = MIDI program # 2
PRESET 01B = MIDI program # 3
PRESET 02A = MIDI program # 4 etc. up to #127...
TimeLine always powers up in MIDI Patch Bank 0, so if you
plan to stay within the first 127 presets (00A-63B), simply
send a standard MIDI Program Change message to load a
preset.
If you will be using MIDI Bank 1, it is advisable to send a
standard MIDI Bank Change message [MIDI CC# 0 with a
value equal to the MIDI Bank #] before each MIDI Program
Change.
Other MIDI CC numbers:
A footswitch 80 down=0 up=127
B footswitch 82 down=0 up=127
TAP footswitch 81 off=0 on=127
Remote TAP 93 any
Infinite Repeats 97 off=0 on=127
Expression Pedal 100 0-127
Bypass 102 byp=0 eng=127
Phase Reset 125 any
MIDI Patch Bank 0 0-1
-Send a 0 value to access presets 00A - 63B.
-Send a 1 value to access presets 64A - 99A.
(continued on next page)
CC# Value Range