User Manual

Volante - Magnetic Echo Machine
pg 12
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
9VDC
INST
LINE
RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
Use a TRS Expression pedal to control the knobs of Volante.
Expression Pedal Setup
Press and hold feedback 2 and 3 buttons for one
second until all the buttons are flashing GREEN.
Connect the Expression pedal to the EXP jack of
Volante using a TRS cable.
Configure the EXP jack for Expression mode.
(See page 7 for details.)
Rock the expression pedal back to the HEEL
position and all the feedback buttons will flash
GREEN.
Set the knobs the way you would like them to be
in the HEEL position. The feedback buttons will
now flash RED.
Rock the expression pedal forward to the TOE
position and all the playback buttons will flash
GREEN.
Set the knobs the way you would like them to be
in the TOE position. The playback buttons will
now flash RED.
Press any feedback button to store and exit
setup. Buttons will stop flashing.
3
2
1
4
5
6
7
8
FAVORITE
pause
playback
feedback
+
NOTE: Expression pedal settings are saved and
recalled as part of the on-board favorite setting
and MIDI accessible presets.