User Manual

Volante - Magnetic Echo Machine
pg 13
Power Up Modes
TRS MIDI OUTPUT
Turn the TIME knob to select mode. FAVORITE
LED indicates selection.
On = GREEN: Using Volante’s knobs and
switches generates MIDI messages that are
sent out of Volante.
Through = AMBER: Incoming MIDI messages
are sent out of Volante without additional MIDI
messages generated by Volante.
Off = RED: No MIDI messages are sent out of
Volante.
SET MIDI CHANNEL
Turn the REC LEVEL knob to select. ON LED
indicates channel selection.
1 = GREEN (default)
2 = AMBER
3 = RED
4-16 = BLUE (channel set by next MIDI message)
With this option, MIDI Channel is set to the
channel of the next incoming MIDI Program
Change message received.
EXP JACK OPTIONS
Turn ECHO LEVEL knob, status shown on TAP
LED.
(See page 7 for details.)
Global parameters and functions can be accessed via a power up procedure. All
power up functions persist through power cycles.
WEAR
ECHO LEVELTIME
SPEEDTYPE
drum
tape
studio
half
normal
double
LOW CUT SPRING
REC LEVEL MECHANICS
even
triplet golden
silver
playback
feedback
SPACING
REPEATS
• Start with the pedal unplugged. Press and hold
the TAP footswitch and then power the pedal by
connecting the 9V power cable.
• Adjust the desired functions with the knobs and
buttons noted below.
• Press the TAP footswitch to exit power up mode.
ON FAVORITE
TAP
∞
hold ( )
hold (SOS)
pausereverse
splice
Magnetic Echo Machine
WEAR
ECHO LEVELTIME
SPEEDTYPE
drum
tape
studio
half
normal
double
LOW CUT SPRING
REC LEVEL MECHANICS
even
triplet golden
silver
playback
feedback
SPACING
REPEATS
LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
9VDC
TAP
hold (SOS)
splice
SPRING
silver
SPACING
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
9VDC
INST
LINE
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
9VDC
ON
FAVORITE TAP
∞
hold ( )
hold (SOS)
pause
reverse
splice
Magnetic Echo Machine
WEAR
ECHO LEVELTIME
SPEEDTYPE
drum
tape
studio
half
normal
double
LOW CUT SPRING
REC LEVEL MECHANICS
even
triplet golden
silver
playback
feedback
SPACING
REPEATS
+