User Manual

Volante - Magnetic Echo Machine
pg 6
Rear Panel
INST/LINE Switch
Sets the input level to the effect processing.
Setting to LINE adds 10dB of clean headroom.
• Use INST for guitars or instruments with lower
output.
• Use LINE for synthesizers, or when placing
Volante in the effects loop of an amplifier or
mixer, or for guitar rigs with high output levels
if more clean headroom is desired.
INPUTS
High impedance audio inputs. Use LEFT IN
for mono input. Connect a jack to the RIGHT
IN for stereo input.
OUTPUTS
Audio signal outputs. Use LEFT OUT for
mono output.
(See page 19 for details.)
MIDI IN
Full featured 5-pin DIN MIDI input. Provides
support for receiving:
• MIDI Program Change (PC) messages to recall
up to 300 presets.
• MIDI Continuous Controller (CC) messages to
control the individual parameters of Volante
including all knobs, switches, buttons, and
Live Edit functions.
• MIDI Clock to sync the delay time with an
external MIDI Clock source.
NOTE: Volante can respond to MIDI Clock along
with MIDI PC and MIDI CC messages received
at the MIDI IN or USB on the assigned MIDI
Channel.
(See page 14 for details.)
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
9VDC
INST
LINE
MIDI OUT
Can be set to send MIDI messages received at the
MIDI IN port or send MIDI data generated by Volante.
(See page 14 for details.)