User Manual

Volante - Magnetic Echo Machine
pg 9
TAP
Press TAP (splice) once to set the splice in
point of the loop. (TAP LED blinks AMBER)
Press splice again to splice out and start loop
playback from splice in point. (TAP LED solid
AMBER)
Press splice once more to clear the recorded
loop. (TAP LED off)
ON
Press ON (reverse) momentarily to reverse the
playback of the Sound on Sound looper. (RED ON
LED)
Press and hold to enter Infinite mode which
disables the record head and continuously
plays the most recent loop length audio without
degrading. (Blinking ON LED)
FAVORITE
Press FAVORITE (pause) momentarily to Stop/
Resume playback of the recorded loop.
Press and hold pause to stop playback of the tape
with mechanical slowdown effect. Release pause to
resume playback with mechanical startup effect.
(AMBER ON LED)
SPEED
SOS mode max recording time:
half - 64 sec
normal - 32 sec
double - 16 sec
Press and hold TAP to enter and exit SOS mode. The ON LED will illuminate AMBER
when in SOS mode. The functionality of all the footswitches changes when in SOS
mode, as described below.
Sound on Sound (SOS)
ON FAVORITE TAP
∞
hold ( )
hold (SOS)
pausereverse splice
Magnetic Echo Machine
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUT
9VDC
INST
LINE
WEAR
ECHO LEVELTIME
SPEEDTYPE
drum
tape
studio
half
normal
double
LOW CUT SPRING
REC LEVEL MECHANICS
even
triplet golden
silver
playback
feedback
SPACING
REPEATS
NOTE: Volante can adjust the Pause Ramp
Speed, SOS Repeat Level, and the SOS Loop
Level independently.
(See page 11 for details.)