User Manual
Table Of Contents
- Strymon Flint User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 11
Flint - tremolo & reverb
Live Edit Functions
Pre-Delay
Adjust the amount of time between the original dry sound and the
onset of the reverb’s early reflections and tail� Shorter Pre-Delay
time emulates the sound of a smaller space� Longer Pre-Delay time
produces the ambience of a larger space and can provide more clarity
to the original dry signal�
1 Press and hold the REVERB ON footswitch to enter Live Edit mode�
Once both LEDs flash, release the footswitch�
PRE-DELAY
2 Turn the COLOR (PREDELAY) knob to turn the adjust the amount
of Pre-Delay� The REVERB ON LED changes color to indicate your
setting:
• Minimum Pre-Delay time: left, GREEN (default)
• Maximum Pre-Delay time: right, AMBER
3 Press the REVERB ON footswitch to exit and store your Reverb Pre-
Delay setting�
NOTE: The Pre-Delay setting is saved per Favorite setting or MIDI preset�