User Manual
Table Of Contents
- Strymon Lex User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 12
Lex - rotary
Power Up Modes
Bypass Mode
Setting Lex to Buffered Bypass mode preserves the high frequency
response of your instrument’s signal through your pedal chain and
long cable runs�
1 Press and hold the ON footswitch while powering up Lex� Once both
LEDs flash, release the footswitch�
2 Turn the VOLUME knob to choose between True Bypass or Buffered
Bypass modes� The ON LED will change color to indicate the current
status as you turn the knob�
• True Bypass: GREEN (default)�
• Buffered Bypass: RED
3 Press either footswitch to store the Bypass Mode and begin using
Lex�
NOTE: The Bypass mode setting persists across power cycles and is not
saved per preset�