User Manual
Table Of Contents
- Strymon Lex User Manual
- Knobs and Switches
- Rear Panel I/O and Control
- Live Edit Functions
- Power Up Modes
- External Control
- MIDI Functionality
- MIDI Specifications
- Factory Reset
- Features
- Specifications
- Appendix 1: Sample Settings
- Appendix 2: Power Up Modes Quick Reference
- Appendix 3: Live Edit Controls Quick Reference
- Strymon Non-Transferable Limited Warranty
pg 26
Lex - rotary
Configuring Lex to Use MIDI (cont.)
STEP 3 SET MIDI OUT MODE
1 Press and hold the SLOW/FAST footswitch while connecting power
to the pedal� Once both LEDs flash, release the footswitch�
2 Turn the HORN LEVEL knob to select what kind of MIDI data is sent
from Lex to other MIDI devices� Both LEDs will flash momentarily to
indicate status�
• OFF: RED (default) - No MIDI messages are sent out of Lex�
• THRU: BLUE - Incoming MIDI messages are sent to the MIDI Out
without any additional MIDI messages generated by Lex�
• SEND CC PC OTHER: WHITE - MIDI CC, PC, and SysEx messages
generated by Lex are all sent to the MIDI Out�
• SEND CC OTHER: GREEN - MIDI CC and SysEx messages gener-
ated by Lex are sent to the MIDI Out�
• SEND PC OTHER: PURPLE - MIDI PC and SysEx messages gener-
ated by Lex are sent to the MIDI Out�
• SEND OTHER: AMBER - SysEx messages generated by Lex are
sent to the MIDI Out�
3 Press either footswitch to store the MIDI OUT mode and exit�