Owner's manual

- 2 -
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a
dry, frost and vibration free location in its original packaging.
TYPICAL INSTALLATION
(Universal Single & Twin Pump System)
The plumbing
installation
must comply with the following:
The Water Supply (Water Fittings)
Regulations 1999.
BS6700 and building regulations.
Be installed by a competent person.
 If in doubt consult Stuart Turner Ltd.
These diagrams should be used for
schematic reference only
Item 1 = System service valves (not
supplied) should be fitted.
Item 2 = Flexible hoses (supplied).
Item 3 = Inline strainer (not supplied.)
Negative Head
NegativeHead
Positive Head
1
1
Fig. 1
1
2
2
3
Fig. 2
1
1
1
1
1
1
2
2
2
3
3