Owner's Manual


E‐17
CAUTION:
 Remove your phone from any metal or magnetic protective case before placing it on the
Charging Pad. Do not place any metal objects or magnetic-striped devices on the
Charging Pads. Doing so could damage the object or this unit.
 Qi compatible phones with metallic finishes will charge normally.
Qi WIRELESS CHARGING FAQ AND COMPATIBILITY
Visit
www.spectraintl.com/FAQ and click on “WIRELESS CHARGING FAQ” for more
information on Qi Charging and a list of devices compatible with the Qi charging system.
USB CHARGING
If your phone doesn’t feature wireless charging, you can still charge your phone with this unit
by connecting a USB charging cable (not included) to the USB Charging Port (DC 5V
2.1A) located on the back of the unit.
1. Plug the standard end of the USB cable into the USB CHARGING PORT (#5) located on
the back of the unit. Plug the other end of the cable into the device you wish to charge.
2. Observe the battery charge indicator on your device to make sure the charging process
starts normally.
3. Unplug the cable when your device is fully charged.
WARNING!
 The USB port located on the back of the unit is designed for a smart phone or portable
device battery charging only and does not support data transfer or connection to a
computer.
 Don’t connect the USB port of the unit to another USB charger. It may damage both units
and void the warranty.
DIMMER OPERATION
Tap the DIMMER BUTTON (#29) repeatedly to select the brightness settings of the LED
display (High, Medium or Low).
NIGHT LIGHT OPERATION
Press and hold the DIMMER BUTTON (#29) repeatedly to select the brightness settings of
the Night Light (Off, Low or High).