Instructions / Assembly

ManualsBrandsStudio Designs ManualsCraft StorageTriflex 39.5 in. W Metal and PB Craft, Art, Drafting Table with Adjustable Height and Tilt, Sit to Stand Desk, Charcoal

Thank you for purchasing our Studio Designs, Inc.

Gracias por comprar nuestro mueble Studio Designs, Inc.

Merci d’avoir acheté un meuble Studio Designs, Inc.

TRIFLEX DRAWING TABLE

#10098 Charcoal/White • Carbón/Blanco • Charbon/Blanc

Rev. 8.21.2018

Ofce: 562.942.0492

Product Support Line: 866.942.0492

www.studiodesigns.com

PATENT

PENDING

15/360,619

Summary of content (8 pages)

PAGE 1
Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. TRIFLEX DRAWING TABLE #10098 Charcoal/White • Carbón/Blanco • Charbon/Blanc PATENT PENDING 15/360,619 Office: 562.942.0492 Product Support Line: 866.942.0492 www.studiodesigns.com Rev. 8.21.
PAGE 2
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Do not use power tools to assemble. A Phillips screwdriver may be required for assembly. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call us.
PAGE 3
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 1. Left Leg Pata Izquierda Jambe Gauche 1 2. Right Leg Pata Derecha Jambe Droite 1 3. Left Tilt Bracket Soporte de Inclinación Izquierdo Support pour Inclinaison Gauche 1 4. Right Tilt Bracket Soporte de Inclinación Derecho Support pour Inclinaison Droite 1 5. Rear Frame Marco Trasero Cadre Arrière 1 6. Base Frame Marco de Base Cadre de Base 1 7.
PAGE 4
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 11. Handle Manija Poignée 2 12. Lift Mechanism Mecanismo de Elevación Mécanisme de Levage 1 13. Allen Bolt - 1/4" x 2-1/2" Perno Allen - 6mm x 62mm Boulon Allen - 6mm x 62mm 4 14. Allen Bolt - 1/4" x 7/8" Perno Allen - 6mm x 22mm Boulon Allen - 6mm x 22mm 8 15. Allen Bolt - 1/4" x 5/8" Perno Allen - 6mm x 15mm Boulon Allen - 6mm x 15mm 6 16.
PAGE 5
1 11 3 4 20 Install Washer (20) between (3) and (1). Install Washer (20) between (4) and (2). Instale Arandela (20) entre (3) y (1). Instale Arandela (20) entre (4) y (2). Installer Rondelle (20) entre (3) et (1). Installer Rondelle (20) entre (4) et (2). 1 11 20 2 19 19 19 19 2 15 Do not tighten any bolt until step 5. No apriete nungun perno hasta el paso 5. Ne pas serrer tout boulon jusqu’à l’étape 5. 15 13 5 15 15 13 Triflex Drawing Table p.
PAGE 6
3 6 Posts face up. Postes hacia arriba. Poteaux vers le haut. 14 4 Leave Screws (17) slightly loose. Caution: Use two people. Precaución: Use dos personas. Précaution : Utilisez deux personnes. Deje Tornillos (17) ligeramente sueltos. Laissez Vis (17) un peu lâche. 7 18 10 18 9 8 17 15 Triflex Drawing Table 17 15 p.
PAGE 7
5 Caution: Use two people. Precaución: Use dos personas. 12 Précaution : Utilisez deux personnes. 17 Triflex Drawing Table Fully tighten all Bolts from steps 2-5. Apriete todos los Pernos de pasos 2-5. Serrer tous les Boulons des étapes 2-5. 16 p.
PAGE 8
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.