Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. GRAPHIX II PROLINE TABLE WITH DRAWERS #10212 White/Gray • Blanco/Gris • Blanc/Gris Office: 562.942.0492 Product Support Line: 866.942.0492 www.studiodesigns.com Rev. 3.19.
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Do not use power tools to assemble. A Phillips screwdriver may be required for assembly. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call us.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 1. Top Mesa Table 1 2. Front Bracket Soporte Delantero Support Avant 2 3. Rear Bracket Soporte Trasero Support Arrière 2 4. Pencil Tray Bandeja para Lápiz Plateau pour Crayon 1 5. Left Bracket Soporte Izquierdo Support Gauche 1 6. Right Bracket Soporte Derecho Support Droite 1 7. Left Frame Armazón Izquierdo Cadre Gauche 1 8.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 12. Crossbar Barra Transversal Barre Transversale 2 13. Left Adjustable Angle Bracket Soporte de Ángulo Ajustable Izquiredo Support d’Angle Ajustable Gauche 1 14. Right Adjustable Angle Bracket Soporte de Ángulo Ajustable Derecho Support d’Angle Ajustable Droit 1 15. Side Shelf Estante Lateral Étagère Latérale 1 16.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 24. Allen Bolt - 1/4" x 5/8" Perno Allen - 6mm x 15mm Boulon Allen - 6mm x 15mm 16 25. Philips Screw - 5/32" x 1/2" Tornillo de Cruz - 4mm x 12mm Vis Cruciforme - 4mm x 12mm 2 26. Allen Bolt - 1/4" x 3/4" Perno Allen - 6mm x 20mm Boulon Allen - 6mm x 20mm 4 27. Floor Leveler Nivelador de Piso Niveleur de Plancher 4 28. Knob Perilla Bouton 4 29.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 36. Large Nut Tuerca Grande Écrou Grand 2 37. Allen Bolt - 1/4" x 3-1/2" Perno Allen - 6mm x 90mm Boulon Allen - 6mm x 90mm 4 38. Allen Bolt - 1/4" x 1" Perno Allen - 6mm x 25mm Boulon Allen - 6mm x 25mm 8 39. Cam Bolt Perno de Leva Boulon à Came 4 40. Cam Lock Cerradura de Leva Serrure à Came 4 41. Wood Pin Clavija de Madera Goujon en Bois 4 42.
1 Round hole faces out, hexagon hole faces in. Agujero redondo hacia afuera, agujero hexagonal hacia adentro. Trou tond versl l’exterieure, trou hexagonale vers l’interieure. 24 3 24 24 1 3 2 24 2 24 x16 Graphix II Proline Table with Drawers p.
2 25 5 25 4 6 Graphix II Proline Table with Drawers 25 x2 p.
3 8 9 26 26 27 7 27 27 27 Graphix II Proline Table with Drawers 26 x4 27 x4 p.
4 11 10 28 Screw knob into first hole. Atornille la perilla en el primer agujero. Vissez le bouton dans le premier trou. 28 28 x4 Graphix II Proline Table with Drawers p.
5 Make sure holes face side to side. Asegúre que los agujeros estén de lado a lado. Assurez-vous que les trous sont placés côte à côte. 29 12 29 12 29 29 29 x4 Graphix II Proline Table with Drawers p.
6 30 32 31 14 30 32 31 13 30 x2 Graphix II Proline Table with Drawers 31 x2 32 x2 p.
7 33 32 32 33 32 x2 Graphix II Proline Table with Drawers 33 x2 p.
8 34 36 34 36 35 35 34 x2 Graphix II Proline Table with Drawers 35 x2 36 x2 p.
9 17 38 16 18 38 18 38 38 x4 38 Sliders face forward. Deslizadores hacía frente. Curseurs vers l’avant. 38 38 38 x4 Graphix II Proline Table with Drawers p.
10 15 37 37 37 37 37 x4 Graphix II Proline Table with Drawers p.
11 41 39 19 41 39 39 x2 41 x2 23 Slot Ranura 21 Rainure 21 20 20 40 40 x2 Make sure panel (23) goes into all slots. Asegúre que el panel (23) entre en todas las ranuras. Assurez-vous que le panneau (23) pénètre dans toutes les rainures. Graphix II Proline Table with Drawers p.
12 22 44 44 44 x4 45 46 46 45 43 28 x4 46 46 46 43 x2 42 Repeat steps 11 and 12 to assemble another drawer. Repita los pasos 11 y 12 para ensamblar otra gaveta. Répétez les étapes 11 et 12 pour assembler un autre tiroir. Graphix II Proline Table with Drawers p.
13 Graphix II Proline Table with Drawers p.
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.
