Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. Deluxe Presentation Easel Model #13185 Black Modelo #13185 Negro Modèle #13185 Noir 7255 Rosemead Boulevard Pico Rivera, CA 90660 562.942.0492 Rev. 02.15.
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack & identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call or write us.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QUANTITY / CANTIDAD / QUANTITÉ 4. Marker Ledge Borde para marcadores Pose-signets 1 5. Phillips Bolt - 3/16" x 1-3/8" Perno de Cruz - 5mm x 35mm Boulon Cruciforme - 5mm x 35mm 2 6. Spacer Espaciador Entretoise 2 7. Washer Arandela Rondelle 2 8. Nut Tuerca Écrou 2 9. Phillips Screw - 1/2" Tornillo de Cruz - 12mm Vis Cruciforme - 12mm 8 Hex Wrench Llave Allen Clé Allen 1 10.
9 9 9 2 1 1. Place Dry Erase board (2) face down on clean, dry Surface. Lay Frame (1) on Dry Erase board (2) and align holes in Frame (1) with holes on back of Dry Erase Board 2. Attach Dry Erase Board (2) using Phillips Screws (9). 1. Coloque la tabla borrable (2) boca abajo sobre una superficie limpio y seca. Coloque Armazón (1) sobre Tabla borrable (2) y aline los agujeros en el Armazón (1) con los agujeros en la parte posterior de la Tabla borrable 2.
8 7 3 6 5 2 4 1 9 1. Stand Easel upright. 2. Attach Upper Clamp (3) using Phillips Bolts (5), Spacers (6), Washers (7) and Nuts (8). 3. Attach Marker Ledge (4) using Phillips Screws (9). 1. Coloque el Caballete en posición vertical. 2. Fije Abrazadera Superior (3) usando Pernos de Cruz (5), Espaciadores (6), Arandelas (7) y las Tuercas (8). 3. Fije el Borde para marcadores (4) usando los Tornillos de Cruz (9). 1. Placez de Chevalet vertical. 2.
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.
