User Manual

ManualsBrandsStudio Projects ManualsMicrophonesMicrophone

Studio Projects is manufactured and marketed under the direction of:

PMI AUDIO GROUP

USA: 1845 W. 169th Street, Gardena, California 90247

voice: (310) 323-9050 facsimile: (310) 323-9051

toll-free USA: (877) 563-6335

UK: Unit 2 Babbacombe Business Park

Babbacombe Road, Torquay, Devon TQ1 3SY

tel: +44 (0) 1803 329848

email: info@pmiaudio.com

Studio Projects

Instruction Manual

• High Quality performance

• Highly durable

• Well suited for project/home studio use

• Active output circuitry (B1 & B3)

• 34mm diameter pressure gradient capsule

employing 3um mylar diaphragms

• Low-noise FET impedance converter (B1 & B3)

• Triode impedance converter (TB1)

• Dedicated power supply (TB1)

• Heavy duty road case (TB1)

visit our web site at studioprojects.com

B S E R I E S M I C R O P H O N E S

b_series_manual.indd 2-3 6/8/06 4:28:03 PM

Summary of content (8 pages)

PAGE 1
B S E R I E S M I C R O P H O N E S • High Quality performance • Highly durable • Well suited for project/home studio use • Active output circuitry (B1 & B3) • 34mm diameter pressure gradient capsule employing 3um mylar diaphragms • Low-noise FET impedance converter (B1 & B3) • Triode impedance converter (TB1) • Dedicated power supply (TB1) • Heavy duty road case (TB1) Studio Projects is manufactured and marketed under the direction of: PMI AUDIO GROUP USA: 1845 W.
PAGE 2
StudioProjects 2 INSTRUCTION BOOK CONTENTS What is Studio Projects.....................................................................................................2 Guidelines For Proper Care/Use.......................................................................................2 Electrical Features.............................................................................................................3 Operation...................................................................................
PAGE 3
StudioProjects 4 OPERATION B1 Using a quality male to female 3-pin XLR cable like the Studio Projects SPC-203X, plug microphone in to gain device (preamp, mixing console, etc.), making sure, that +48-volt phantom power is active and gain is not at a level sufficient to cause ear-splitting feedback through monitor speakers. Address microphone from the side (not the top of the grill) above the SP logo badge. If bass cut is required, select one of two featured high pass filters.
PAGE 4
StudioProjects 6 www.studioprojects.com 7 B3 B1 The Studio Projects B1 is an externally polarized cardioid pressure gradient transducer microphone with FET impedance converter. Diaphragm material is 3µm mylar for natural reproduction of vocals and instruments. It features dual selectable pads and high pass filters for a total of nine possible modes of operation. The output circuitry is active and is capable of driving long cable runs. The B1 is useful for all manner of recording work and music styles.
PAGE 5
StudioProjects 8 TB1 The Studio Projects TB1 is an externally polarized cardioid pressure gradient transducer microphone with a vacuum tube based impedance converter. Diaphragm material is 3µm mylar for natural reproduction of vocals and instruments. The TB1 features a humbucking output transformer for balancing the microphone signal and driving long cable runs. Included with the microphone is a shockmount, external power supply with AC cord, dedicated 7pin XLR cable, and hard shell road case.
PAGE 6
This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number NOTE — This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
PAGE 7
STUDIO PROJECTS LIMITED WARRANTY DISCLAIMER OF WARRANTY T H I S P R O D U C T I S F O R P R O F E S S I O N A L U S E O N LY ALL OTHER WARRANTIES, EXPRESS OR LIMITED, INCLUDING, BUT NOT LIMITED TO ANY/OR ALL IMPLIED EXCEPT FOR THE FORGOING WARRANTIES, PMI HEREBY DISCLAIM S AND EXCLUDES WARRANTIES OF MERCHANT ABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVED PMI Audio Group warrants that all products will be free from defects in mat
PAGE 8
Zip Code: 1845 W.