Use and Care Manual

STUDIO SHED CARE AND MAINTENANCE

With proper care and maintenance, your Studio Shed is designed to look and per-

form years down the road as well as it did the day your installation was completed.

Below are some recommendations to keep your Studio Shed in optimal condition.

• Keep grass and vegetation trimmed around the exterior of your Studio

Shed.

• Ensure that your Studio Shed remains above grade - do not pile soil or dirt

around the base of your Studio Shed.

• Do not stack anything against the exterior of your Studio Shed.

• Locking doorknobs should be lubricated seasonally with graphite or similar

to ensure smooth operation.

• Do not allow sprinklers to spray directly against the exterior of your Studio

Shed.

• Inspect paint and maintain as necessary. Studio Shed uses a commercial

grade exterior paint, which should last for many years. Touch-up may be

necessary depending on your exposure and climate.

• Doors and windows have extended manufacturer warranties. For more

information please visit: www.milgard.com and www.thermatru.com

• Inspect exterior caulking and sealing around windows and doors annually,

reseal or re-caulk as necessary. Frequency depends on exposure and cli

mate.

PAGE 1
STUDIO SHED CARE AND MAINTENANCE With proper care and maintenance, your Studio Shed is designed to look and perform years down the road as well as it did the day your installation was completed. Below are some recommendations to keep your Studio Shed in optimal condition. • Keep grass and vegetation trimmed around the exterior of your Studio Shed. • Ensure that your Studio Shed remains above grade - do not pile soil or dirt around the base of your Studio Shed.
PAGE 2
STUDIO SHED WARRANTY Studio Shed warrants to the original purchaser of the Product that, should there be any defects in the material or workmanship during the initial 12 months (one year) from your receipt of the Product, Studio Shed will either repair or replace the covered defects. You must notify Studio Shed of any claim of defects in the material or workmanship within twelve (12) months after your receipt of the Product.