Live Link Range Summary

ManualsBrandsSTUDIO TECHNOLOGIES ManualsVideo ProductionLive-Link Jr System. - Remote Camera Interface System

Studio Technologies, Inc. Live-Link Full-Line Summary Issue 9, May 2019 • 1

Remote Camera Interface Systems Full-Line Summary

Live-Link Mini Series

Supports Two Paths of 3G Digital Video, Line/IFB Outputs, Party-Line Intercom,

and 4-Wire Intercom

These versions interconnect using one strand of single-mode fiber-optic cable (not included) and provide support for the

following:

• Digital Video: one 3G/HD/SD-SDI send (camera to truck) and one 3G/HD/SD-SDI return (truck to camera)

• Line/IFB: two analog line-level audio returns (truck to camera) and one 2-channel IFB output (camera) with 28 V beltpack

power

• Intercom: integrated 2-channel system with party-line on all Camera End and Truck End units; single-channel 4-wire

interface on Truck End Rack-Mount unit

• Powering: Camera End and Truck End Portable units powered by 12 Vdc or battery; Truck End Rack-Mount unit powered

by 100-240 V, 50/60 Hz or 12 Vdc

• Embed Outputs: Truck End Portable unit provides two analog outputs de-embedded from SDI group 1 audio; Truck End

Rack-Mount unit provides four analog outputs de-embedded from SDI group 1 audio

Camera End and Truck End Portable units include enclosure with Anton/Bauer battery mount system (contact factory for

“V-Mount” availability), handle, and rubber feet. Truck End Rack-Mount unit mounts in one space (1U) of a standard 19-inch

equipment rack. All units each use one ST fiber-optic connector. Camera End and Truck End Portable units include a universal

input (100-240 V, 50/60 Hz)/12 Vdc output power supply.

Camera End Unit

Camera End Unit – Portable (Order Code: LLM-CA-105)

Truck End Units

Truck End Unit – Rack-Mount (Order Code: LLM-TE-107)

Truck End Unit – Portable (Order Code: LLM-TE-109)

Typical Configurations

LLM-CA-105 (portable) with LLM-TE-107 (rack-mount)

LLM-CA-105 (portable) with LLM-TE-109 (portable)

Live-Link Mini Accessories

Replacement 12 Vdc, 5 A Power Supply

(Order Code: PS-DC-01)

Universal input, 100-240 V, 50/60 Hz; 12 Vdc, 5 amps (60 watts) output power supply. IEC C14 mains

inlet; cable-mounted 4-pin female XLR DC output. One included with each Live-Link Mini Camera End

unit and Truck End Portable unit. Order as spare or replacement only!

Replacement Audio Cable (XLR5F to Dual XLR3M)

(Order Code: 13684)

Used with Live-Link Mini Truck End Portable unit to “break out” 5-pin XLR connector into two 3-pin

male XLRs. Overall length approximately 3 feet (0.9 meters). One included with each Live-Link Mini

Truck End Portable unit. Order as spare or replacement only!

Summary of content (7 pages)

PAGE 1
Remote Camera Interface Systems Full-Line Summary Live-Link Mini Series Supports Two Paths of 3G Digital Video, Line/IFB Outputs, Party-Line Intercom, and 4-Wire Intercom These versions interconnect using one strand of single-mode fiber-optic cable (not included) and provide support for the following: • Digital Video: one 3G/HD/SD-SDI send (camera to truck) and one 3G/HD/SD-SDI return (truck to camera) • Line/IFB: two analog line-level audio returns (truck to camera) and one 2-channel IFB output (camera) wi
PAGE 2
Live-Link Jr.
PAGE 3
Live-Link “04X” Series Supports Four Paths of 3G Digital Video, Four Mic/Line Inputs, Line/IFB Outputs, and 2-Channel Intercom These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the following: • Digital Video: two 3G/HD/SD-SDI sends (camera to control room) and two 3G/HD/SD-SDI returns (control room to camera) • Mic/Line Audio: four analog mic/line sends (camera to control room) with selectable gain and 48 V phantom power • Line/IFB: two ana
PAGE 4
Live-Link “05X” Series Supports Five Paths of 3G Digital Video, Four Mic/Line Inputs, Line/IFB Outputs, and Party-Line Intercom These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the following: • Digital Video: three 3G/HD/SD-SDI sends (camera to control room) and two 3G/HD/SD-SDI returns (control room to camera) • Mic/Line Audio: four analog mic/line sends (camera to control room) with selectable gain and 48 V phantom power • Line/IFB: two
PAGE 5
Live-Link “06X” Series Supports Four Paths of 3G Digital Video, One Path of Analog Video, Four Mic/ Line Inputs, Line/IFB Outputs, and Party-Line Intercom These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the following: • Digital Video: two 3G/HD/SD-SDI sends (camera to control room) and two 3G/HD/SD-SDI returns (control room to camera) • Analog Video: one analog (composite) return (control room to camera) • Mic/Line Audio: four analog mic/
PAGE 6
Live-Link “07X” Series Supports Six Paths of 3G Digital Video, Four Mic/Line Inputs, Line/IFB Outputs, and Party-Line Intercom These versions interconnect using two strands of single-mode fiber-optic cable (not included) and provide support for the following: • Digital Video: five 3G/HD/SD-SDI sends (camera to control room) and one 3G/HD/SD-SDI return (control room to camera) • Mic/Line Audio: four analog mic/line sends (camera to control room) with selectable gain and 48 V phantom power • Line/IFB: two ana
PAGE 7
Live-Link Accessories Live-Link Rack Mounting Enclosure (Order Code: LL-RME-01) For use with Live-Link rack-ready versions only. One or two Live-Link units can be mounted in this enclosure which is then mounted in three spaces (3U) of a standard equipment rack. Live-Link Cover (Order Code: LL-COVER-02) For use with Live-Link Rack-Ready units. Aluminum cover with no handle, battery bracket, or protective bumpers. For specialapplication use only.