User's Manual
Numa Compact 2/2x by Studiologic
9
E
Power - Inputs and connections
Use the power adapter supplied with the device to connect
the Numa Compact to the power socket (or use the USB con-
nection). Switch the unit on by using the power button next
to the power plug of the Numa Compact, set the main Vo-
lume, Bass and Treble controls to the half position and the
Mastering control to zero-minimum (the function will be ex-
plained later on this manual) to avoid excessive output power
and allow the internal speakers to play with a correct dyna-
mic range.
The instrument can also be powered by USB, using a shielded
quality certied cable and providing that the computer
has enough power and not too many devices are powered
through the same USB port.
When the instrument is USB powered, the internal amplica-
tion system is disconnected.
PLEASE NOTE: in case of weak or unstable connection, use
the traditional power (see previous paragraph).
Connect the (optional) pedal or pedals to the related sockets,
labelled Ped1 and Ped2; at the socket labelled Ped 1 you can
plug in the Studiologic VP pedal, typically for volume-expres-
sion controls. To the Ped2 socket you can plug either a single
swicth pedal, a volume-expression pedal or the custom triple
pedal SLP3-D, as explained in the related chapter.
If you want to use external amplication systems, or record
the instruments sounds, connect the Left and Right audio
outputs to the inputs of your mixing desk or amplier, or to
your computer audio board inputs, using suitable cables.
Power connection
USB power
Expression / Universal pedals
Audio output
Power
12V - 2,5A
USB Port
MIDI I/O, rmware update,
power
Ped 1, Ped 2
Expression pedal,
Universal pedal
Audio L/R Out
2x 6,3mm mono jack
MIDI In-OutPower On/O
Headphones / Aux Out
1x 6,3mm stereo jack
Power - Inputs and connections