User's Manual

SL Controllers by Studiologic®
14
Global settings
GLOBAL / SYSTEM:
V 1.6.0
PEDAL PRG +/-
OFF
PED1 +
PED1 -
PED2 +
PROGRAM +/-
This function allows to increment or decrement the current
SL Program, using single-switch pedals connected to the Ped
1 or Ped 2 sockets; the available settings are:
• OFF: function disabled
• PED1 + pressing a pedal connected to PED1 will increment
the current Program a step ahead (i.e from Program 001 to
002 and so on);
• PED1 – pressing a pedal connected to PED1 will decrement
the current Program a step below (i.e from Program 002 to
001 and so on);
• PED2 + pressing a pedal connected to PED2 will increment
the current Program a step ahead (i.e from Program 001 to
002 and so on);
• PED2 – pressing a pedal connected to PED2 will decrement
the current Program a step below (i.e from Program 002 to
001 and so on);
• PED1/2 +/- two pedals connected to PED1 and PED2 will
allow to increment or decrement the current Program;
• PED1/2 EXT with this setting the SL will send and receive
the Data Increment and Data Decrement controls via USB in,
allowing to control the main Programs from computer
software applications enabled to make this function.
NOTE: when one of the PED 1/2 Global functions are activa-
ted, the related pedal setting of each Program are overwrit-
ten by the Program -/+ function and the ZONE programming
will be shown in a grey color; setting to OFF the related Glo-
bal pedal functions will re-enable the original Zone setting of
the pedals.
COMMON CHANNEL
As COMMON is intended a MIDI channel that allows to send
or receive generic controls from and to the SL, not directly
related to a single Zone; the function that needs a Common
Channel (set to one of the available 16 MIDI channels) is the
Program +/-.
The COMMON Channel selection includes the these values:
• OFF: no Common channel messages enabled;
• 01/16: selected Common Channel (the most used setting is
the MIDI CH 16);
GLOBAL / SYSTEM:
V 1.6.0
COMMON CHANNEL:
016