Installation Guide

INSTALLATION

INSTRUCTIONS

● We recommend that this product is installed by a qualified professional contractor.

● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make

sure this product is the correct model and you have all the parts required for installation and using.

● Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the taps.

●

Turn off water supply before commencing work, this should be done at the isolating valves of inlet feeds if fitted or main sto

pcock.

● Please read these instructions carefully and keep it for future reference.

Important

Maintainance

We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula

too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and dried with a soft cloth.

Single-lever kitchen mixer

ST1100CH/ST1100MB

Dimensions

Unit:inches

9.07"

7.24"

20.08"

max1.18"

1.38"

4.43"

PAGE 1
INSTALLATION INSTRUCTIONS ST1100CH/ST1100MB Single-lever kitchen mixer Important ● We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make sure this product is the correct model and you have all the parts required for installation and using. ● Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the taps.
PAGE 2
Installation MIXER BODY RETAINING NUT HANDLE Mixer body CARTRIDGE CARTRIDGE COVER GRUB SCREW CAP Threaded pipe ALLEN KEY Flexible hose Gasket Plastic washer Rubber washer Metal Washer Screw nut Head screw To remove the cartridge. First shut off the water supply to the tap. 1: Pull out the cap from the handle. 2: Loosen the grub screw in handle, but do not remove it. 3: Take off the handle, unscrew the cartridge cover. 4: Using a correct size spanner unscrew the retaining nut.