Installation Guide

4
ASSEMBLY INSTRUCTIONS
3. Secure the crossbar (EE) to the outlet box (not included)
with outlet box screws (AA).
HARDWARE USED
3
AA
Outlet Box Screw
Outlet Box
x 2
HARDWARE USED
HARDWARE USED
DD
FF
EE
AA
GG
HH
Bulb
x 2
Socket Ring Tool x 1
Socket Ring x 2
Glass Holder x 2
EE
Crossbar
x 1
Lowes.com
1. Remove the socket ring (GG) and the glass holder (HH)
from the fixture body (A) by hand. Using a tissue or glove
(not included), install bulb (DD) into each socket on
fixture
body (A). Caution: Oil from fingers will
decrease the life
of the bulb (DD).
2. Place the glass (B) on the socket of fixture body (A), then
place the glass holder (HH) on top. Secure with socket
ring (GG), tightening with socket ring tool (FF). Note: Do
not overtighten.
1
DD
GG
HH
2
FF
GG
B
HH
A
A