Installation Guide

CORRECT ASSEMBLY
B
I
N
N
E
R
TOP
B
O
U
T
E
R
TOP
B
O
U
T
E
R
TOP
B
I
N
N
E
R
TOP
B
I
N
N
E
R
TOP
B
O
U
T
E
R
TOP
2
PREPARATION
Before beginning assembly, make sure all parts are present. Compare parts with package
contents list and hardware contents list.
If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 15 minutes
No tools required for assembly.
SAFETY INFORMATION
• Two people are recommended to ensure safe assembly and to hold pole in place for final
adjustment.
• The load capacity for each basket is approximately 10 lbs.
Please read and understand this entire manual before attempting to assemble or install the product.
WARNING
IMPORTANT
B
I
N
N
E
R
TOP
B
O
U
T
E
R
TOP
Before beginning pole assembly, make sure part B is assembled correctly.
If the 2-piece tube (B) is assembled as shown,
continue to Step 1 of the Assembly Instructions
section. DO NOT REMOVE the packing material at
the bottom of the 2-piece tube (B) until beginning
Step 1 of the Assembly Instructions.
If the 2-piece tube (B) comes apart, position
the tubes as shown. Refer to the instructions
on page 3 to re-assemble the tube. Part B
includes 2 tubes (one labeled OUTER, one
INNER). The INNER tube has a white plastic
cam lock mechanism at the bottom. DO NOT
REMOVE THE CAM LOCK.
DO NOT
REMOVE
DO NOT REMOVE the packing
material at the bottom of the
2-piece tube (B) until beginning
Step 1 of the Assembly
Instructions.