How to Guide

ManualsBrandsStyle Selections ManualsFreestanding Shower Caddies41456L

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Top tube

B 2-piece tube

C Long tapered tube

D Bottom tube

E Small basket

F Large basket

HARDWARE CONTENTS (shown actual size)

ITEM #0761366, 0761367, 0761368

MODEL #41450L, 41451L, 41456L

POLE SHOWER CADDY

ATTACH YOUR RECEIPT HERE

Serial Number

Purchase Date

AB17734

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.

Style Selections® is a registered trademark

For video instructions, scan QR code with

smartphone or visit:

https://youtu.be/gL7j5kE-Dys

Qty. 4

Plastic O-ring

includes INNER and OUTER tube

Qty. 4

Rubber O-ring

Summary of content (6 pages)

PAGE 1
ITEM #0761366, 0761367, 0761368 POLE SHOWER CADDY MODEL #41450L, 41451L, 41456L Style Selections® is a registered trademark of LF, LLC. All Rights Reserved. For video instructions, scan QR code with smartphone or visit: https://youtu.be/gL7j5kE-Dys ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble or install the product. WARNING • Two people are recommended to ensure safe assembly and to hold pole in place for final adjustment. • The load capacity for each basket is approximately 10 lbs. PREPARATION Before beginning assembly, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 3
RE-ASSEMBLING THE 2-PIECE TUBE (B) TOP I B B B NNER UTE I O TOP TOP NN R E I collar TOP B O UTE R TOP O threaded plastic insert cam lock TOP TOP B I NN R E B I NNER 3 B UTE R I B B NNER 3. Continue to push the INNER tube through the OUTER tube until it comes up through the collar at the top. Refer to Step 6 of the Assembly Instructions section to adjust height. TOP TOP UTE O B R TOP NNER 2. Insert the top of the INNER tube into the bottom of the OUTER tube.
PAGE 4
ASSEMBLY INSTRUCTIONS 1. Remove packing material from bottom of tube with twist lock (B). Insert narrow end of long tapered tube (C) into tube with twist lock (B). Then, insert the narrow end of another long tapered tube (C) into the assembly, followed by the remaining long tapered tube (C). 1 B Note: If ceiling height is less than 103 inches, only two long tapered tubes (C) are required for assembly. C C C 2. Insert plastic O-rings (AA) into small basket (E) and each large basket (F).
PAGE 5
ASSEMBLY INSTRUCTIONS 4. Insert narrow end of bottom tube (D) into assembled pole to complete assembly. 4 D 5. Insert narrow end of the 2-piece tube (B) into top tube (A). 5 A Note: Part A and Part B should not fit snug. Part A contains a spring inside which keeps tension to the ceiling. Therefore, Part B will not fit all of the way into Part A. The pole was designed like this and is not defective. B 6.
PAGE 6
CARE AND MAINTENANCE This product is intended for residential use only and for common bath and shower accessories (shampoo, soap razors, etc.), not for heavy objects or for areas without a firm, flat surface, such as drop ceilings or curved tub surfaces where product might slip if not installed properly. This product is intended for wet areas where mold and mildew might be present. To clean baskets and poles of occasional soap buildup or mold, use a small soft-bristle brush and mild detergent.