Installation Guide

3
3
ASSEMBLY INSTRUCTIONS
3.
4. Insert narrow end of bottom tube (D) into
assembled pole to complete assembly.
5.
D
B
B
From the bottom of the pole assembly, slide
small basket (E) up to desired position, then
secure with rubber O-ring (BB). Repeat this
step for the large baskets (F).
Hold
Here
Twist
Here
4
5
x 4
Hardware Used
BB
Rubber O-ring
To install the assembly, push the top of the
pole against the ceiling until it is vertical
with the floor; adjust height as needed.
To adjust the height of assembly, hold the
end of tube with twist lock (B) with the
larger diameter. Then, twist the other end
counterclockwise to loosen the tension.
Raise or lower the pole assembly to desired
height, then twist the tube with twist lock (B)
clockwise to re-secure.
Note: The minimum ceiling height required
for installation is 65 inches. The maximum
ceiling height required for installation is 113
inches.
BB
BB
BB
BB
E
C
F
F
F